“Driven by Values, Powered by Passion”
Water
DI Pipes & Fittings
DI Pipes
- Product Standards: BS EN 545; ISO: 2531
- Sizes: DN 50 to DN 1200
- Class: K7, K8, K9 and K10
- WARS certified for portable water application.
- Pipes are supplied in standard length of 5.5 / 6.0 meters. Short length pipes as per respective standards can also be supplied
- PMA (allowable maximum operating pressure) is the maximum internal pressure, including surge, that a component can safely withstand in service.
- PEA (allowable test pressure) is the maximum hydrostatic pressure that a newly installed component can withstand for a relatively short duration, when either fixed above ground level or laid and back-filled underground in order to measure the integrity and leak tightness of the pipe.
Properties & Advantages Of Ductile Iron Pipe
- High tensile strength and High yield strength
- High elongation (ductility)
- Simple Push-on type jointing System
- Even unskilled workers can join the pipes
- Reliable and cost effective internal and external corrosion protection.
- Impermeable to gas and organic contaminant
- High impact resistance and fatigue resistance
- Good Resistance to handling / transportation damage
- Offers considerable joint deflection
- Resistant to stray current effect due to electrical discontinuity at joints
- Imported back-fill not normally required
DI Fittings
- WARS certified
- Flanged Sockets
- Double Socket bends
- Single Socket bends
- All socket Tees
- All Flanged Tee
- Double socket Tee with flanged Branch
- Double socket tapers
- Double flanged tapers
- Special Joints available to resist longitudinal joint withdrawal.
DI Valves
- Butterfly valves
- Gate Valves
- Non-return Valves
- Sizes: DN 50 to DN 1200
- Pressure Class: PN6 to PN 25
- WARS certified.
Carbon Steel Pipes & Fittings For Water Application
- Application: for transportation of Potable water, Sewage water etc. These pipes can also be used for piling application for the construction of Jetties.
- Product Standards: API 5L, ISO 3183-3 etc.
- Sizes: 18” to 130”
- Pipe thickness: 6 mm to 25 mm
Advantages Over DI pipes:
- Light in weight and easy for installation.
- Laying is very simple.
- Steel pipes are available in 12 mtr. lengths, so reducing number of joints to half.
Insertion Valves
This valve used mainly for water application where pipelines can’t be shutdown for repairing of damages. This valve can be fixed at the damaged pipe section without shutting down the line.
- It does not have any negative affect on pipe integrity
- Valve size ranges from 1 ½” to 24”
- Pressure rating of 250 psi / 723.68 kPa / 17Bar
- WARS Certified.
- Complies with AWWA C-509-01/C515-15 standards
- UL Classified to NSF/ANSI Standard 61 Drinking Water System.
- Can be inserted with all Pipe material.
- Water
